Setting up your mesh is easy; in just a few steps you’ll be connected and ready to go.
First, plug your mesh into a power outlet and wait for the light to flash red.
Next, you’ll want to pair your mesh to your mains system, to do this you will need to press and hold the WPS button on both devices for three full seconds. You will need to push both buttons within 30 seconds of each other. It works best to pair them in the same room, even if you’re going to move the mesh to a different location.
The light will flash green as they are pairing with each other. Once the pairing is complete, the system and the mesh will both show a solid green light, be patient as this may take several minutes.