We’ve made setting up your mesh as simple as 1, 2, 3. In just a few steps you’ll be connected and ready to go.
First, plug your mesh into a power outlet, wait for the light to flash red.
Next, you’ll want to pair your mesh to your main system, to do this you will need to press and hold the WPS button on both devices for three full seconds. You will need to push both buttons within 30 seconds of each other. It works best to pair them in the same room, even if you’re going to move the mesh to another location.
The light will flash green as they are pairing to each other. Once pairing is complete, the system and the mesh will both show a solid green light. Be patient as this may take several minutes.